I'm not sure a parts list ever existed, per se.  My installation manual has no seperate parts list; it just tell you what to do with the parts that came with it.  Basically, you need the tank, the filter, two lengths of heater hose (one 5/8 and one 3/4) the pex or aluminum fuel line, another 5 feet or so of regular fuel line to connect the valves and filters to the lines, two valves, a switch or two and all the fittings to connect everything together.  Do you have the  hose-in-hose termination fitting that was in the car?   You might also want a temperature gauge, maybe a fuel pressure gauge and an electric or coolant heat exchanger. 
Lots of ways to clean it.  Start by scraping off as much as you can, then switch to a cleaning solution.  I've used oven cleaner, and it works well, but you have to be careful with it (just like when you are cleaning your oven).  I think I've heard of people using Purple Power as well as a few others.  Search the forum.  You could look on the Frybrid Forum too - it has a search function. 

these kinds of post
 
I am referring to those posts that were deleted by Rick.
Those posts have nothing to do with greasing stuff, but give you a link to go somewhere for something else.
Rick works hard on cleaning up this forum everyday. Thank you.
 
Sorry to create the confusion here.

I wanted to inform you for this great help!! I definitely enjoyed every little bit of it. I have you bookmarked to check out new stuff on this post.
click here **
shearling coats men's and women's **
vintage aviator jacket sale **
womens motorcycle chaps **