Finally getting around to installing my greasecar kit in a 1987 Mercedes 300SDL (not too many of those out there to compare with). Question is this: does anyone have any pictures of where they have located their valves in a 300SDL? I found many with the 5 cylinder 300D or SD, but not very many with the 6 cylinder SDL. I'm thinking about putting the 2 valves one right above the other and the filter in the front left corner of the engine bay behind the headlight, but before I start drilling any holes in this cherry, completely stock and beautiful vehicle, I want to look at a couple of other install pics. Anyone have any to share? Thanks, Jere
I do miss my 87 300SDL, great car to have. I however, don't have any pictures of the install I do however remember the location of the vavles and filter. I choose to place my valves on the driver side engine bay area. Near the black brake system. Then I placed the filter housing system up top so I could run the coolant hose down the fire wall area.
Hope that helps.
1998 Jetta TDI Greasecar kit totalled by pickup truck
1987 300sdl Greasecar kit +30 fphe sold
2003 F350 Greasecar kit + 30 fphe sold
2006 Jetta TDI Greasecar kit + 30 FPHE
Greasecar Kits and Products