Home › Forums › Tech Tips ›

DAVCO MODEL 380 FILTER

2 replies [Last post]
January 4, 2005 - 11:54am
sergio
sergio's picture
Offline
Joined: 12/08/2004

Has anyone used these filters for wvo,I am able to get one for $59.00 brand new,Will it work for me

-------------------------
sergio

Top
January 4, 2005 - 5:45pm
#1
rkpatt
rkpatt's picture
Offline
Joined: 11/05/2004

Maybe fine with a DIY coolant heater . Any access to another at that price, if so email me p3pete@yahoo.com.

__________________

Top
January 4, 2005 - 5:53pm
#2
Nate@enviofuel
Nate@enviofuel's picture
Offline
Joined: 11/11/2004

I have a Davco 380 in my datsun p/u 4x4 and it works good but I wish it would get a little hotter. It is coolant heated and has a very large copasity and a huge filter housing. I have a replacement cover for the filter housing wich will allow you to shave a few inches of the top. It is over a foot long and needs clerance on top and bottom. If it's like mine you should by-pass the coolant thermistat on the 380 to allow for uniteruped flow of coolant. If you have a 12v heat option don't bother because it will only keep the fuel from freezing and will not heat in up to the reqired 100 for filtering. It works good for small motors If you are running anything else you need the Davco 234 12v Nate@enviofuel.com

-------------------------
Drive for free-Check out enviofuel.com

Top